Ford Sierra Manual

Headlamp wiper motor - removal and refitting
Body electrical system / Headlamp wiper motor - removal and refitting


Note: On vehicles fitted with foglamps, the headlamp unit must be removed when the righthand headlamp wiper motor is to be removed.

Removal
1 Disconnect the battery negative lead.

2 Disconnect the washer hose from the nozzle on the end of the wiper arm, then remove the wiper arm.

3 Pull the washer hose and retainer from the end of the motor shaft.

4 Remove the radiator grille panel.

5 Where applicable, prise the trim strip from the bottom of the headlamp unit for access to the wiper motor mounting bolts (see illustrations).

40.5a Prise the trim strip from the bottom of the headlamp unit . . .
40.5a Prise the trim strip from the bottom of the headlamp unit . . .

40.5b . . . for access to the headlamp wiper motor mounting bolts
40.5b . . . for access to the headlamp wiper motor mounting bolts

6 Remove the two mounting bolts, then working under the wheel arch, slide the wiper motor rearwards, disconnect the wiring plug and withdraw the motor.

Refitting
7 Refitting is a reversal of removal, but on completion adjust the free length of the washer hose between the nozzle and the retainer on the motor shaft.


© 2018 www.fsierra.ru. All Rights Reserved.