Ford Sierra Manual

Door lock barrel - removal and refitting
Bodywork and fittings / Door lock barrel - removal and refitting


Removal
1 Remove the door inner trim panel.

2 Where necessary for access, peel back the waterproof plastic sheet from the door.

3 Remove the window channel extension screw from the bottom rear corner of the door, and withdraw the channel through the lower door aperture.

4 Working inside the door aperture, pull out the lock barrel retaining clip using pliers, then unhook the lock operating rod from the barrel, and withdraw the barrel from outside the door (see illustration).

20.4 Door lock barrel location. Retaining clip arrowed
20.4 Door lock barrel location. Retaining clip arrowed

Refitting
5 Refitting is a reversal of removal.


© 2018 www.fsierra.ru. All Rights Reserved.