Ford Sierra Manual

Tailgate lock (Hatchback and Estate models) - removal and refitting
Bodywork and fittings / Tailgate lock (Hatchback and Estate models) - removal and refitting


Removal
1 Open the tailgate and prise out the trim panel using a wide-bladed screwdriver (see illustration).

12.1 Tailgate trim panel fixings - Hatchback and Estate models
12.1 Tailgate trim panel fixings - Hatchback and Estate models

2 Remove the lock barrel retaining clip, and where applicable disconnect the operating lever from the central locking solenoid/motor, then withdraw the lock barrel (see illustration). Central locking solenoid/motor removal and refitting is covered in Chapter 13.

12.2 Tailgate lock assembly - Hatchback and Estate models
12.2 Tailgate lock assembly - Hatchback and Estate models

A Lock barrel support bracket B Lock barrel retaining clip C Lock barrel
D Torx screw
E Lock assembly
F Screws

3 Remove the two securing screws and detach the lock barrel support bracket from the tailgate.

4 Where applicable, disconnect the battery negative lead, the earth lead from the tailgate and the Уtailgate ajarФ sensor wiring plug.

Unclip the luggage compartment light switch from the lock assembly, where applicable.

5 Remove the securing screws and withdraw the lock assembly.

Refitting
6 Refitting is a reversal of removal, but do not tighten the lock barrel support bracket screws until the lock barrel has been fitted.


© 2018 www.fsierra.ru. All Rights Reserved.