Ford Sierra Manual

Bonnet lock - removal and refitting
Bodywork and fittings / Bonnet lock - removal and refitting


Models up to 1987
1 Working in the engine compartment, disconnect the cable from the bonnet lock by pulling the cable sheath end fitting from its bracket, then releasing the end fitting from the lock lever.

2 Remove the three securing screws and withdraw the lock from the front panel.

3 Refitting is a reversal of removal.

Models from 1987
4 Remove the radiator grille panel.

5 Disconnect the cable from the bonnet lock by pulling the cable sheath end fitting from its bracket, then releasing the end fitting from the lock lever.

6 Detach the bracing strut from the lock by removing the screw, then remove the two securing screws and withdraw the lock from the front panel.

7 Refitting is a reversal of removal.


© 2018 www.fsierra.ru. All Rights Reserved.