
Ford Sierra Manual
Steering gear rubber gaiter - renewalSuspension and steering / Steering gear rubber gaiter - renewal
1 Remove the tie-rod end.
2 Unscrew and remove the tie-rod end locknut from the tie-rod.
3 Remove the clips and slide the gaiter from the tie-rod and steering gear.
4 Slide the new gaiter over the tie-rod and onto the steering gear. Where applicable, make sure that the gaiter seats in the cut-outs in the tie-rod and steering gear.
5 Secure the gaiter with new clips.
6 Refit the tie-rod end locknut to the tie-rod.
7 Refit the tie-rod end.








© 2019 www.fsierra.ru. All Rights Reserved.