Ford Sierra Manual

Steering wheel - removal and refitting
Suspension and steering / Steering wheel - removal and refitting


Removal
1 Set the front wheels in the straight-ahead position.

2 Prise the trim insert from the centre of the steering wheel, and where applicable, disconnect the horn electrical lead(s) (see illustration).

22.2 Prise off the steering wheel trim insert and disconnect the horn
22.2 Prise off the steering wheel trim insert and disconnect the horn electrical lead

3 Insert the ignition key and check that the steering lock is disengaged.

4 Unscrew the retaining nut and withdraw the steering wheel from the hexagon shaped inner column (see illustration). If the wheel is tight on the inner column, sit in the driver’s seat and tap the wheel from behind with the palms of the hands (but screw the nut back on two or three turns for safety).

22.4 Removing the steering wheel retaining nut
22.4 Removing the steering wheel retaining nut

Refitting
5 Refitting is a reversal of removal, but check that the lug on the direction indicator cam is aligned with the cut-out in the steering wheel, and make sure that the direction indicator switch is in the neutral position. Tighten the retaining nut to the specified torque.


© 2018 www.fsierra.ru. All Rights Reserved.