Ford Sierra Manual

Pulse-air control solenoid (1.6 litre CVH) - removal and refitting
Fuel and exhaust systems - fuel injection / Pulse-air control solenoid (1.6 litre CVH) - removal and refitting


1 The solenoid is located at the right-hand side of the engine compartment.

2 Disconnect the battery negative lead.

3 Disconnect the vacuum pipe connector from the pulse-air control solenoid (see illustration).

23.3 Disconnect the vacuum pipe connector from the solenoid
23.3 Disconnect the vacuum pipe connector from the solenoid

4 Disconnect the solenoid wiring plug, pulling on the plug, not the wiring.

5 Unscrew the securing screw, and withdraw the solenoid from the body panel.

6 Refitting is a reversal of removal, ensuring that the locating lug is correctly positioned, and noting that the vacuum pipes will only fit in one position.


© 2018 www.fsierra.ru. All Rights Reserved.