Ford Sierra Manual

Fuel injector ballast resistor (1.6 litre CVH) - removal and refitting
Fuel and exhaust systems - fuel injection / Fuel injector ballast resistor (1.6 litre CVH) - removal and refitting


1 The ballast resistor is located on the righthand side of the engine compartment, and is only fitted to 1.6 litre engines (see illustration).

17.1 Fuel injector ballast resistor location (arrowed)
17.1 Fuel injector ballast resistor location (arrowed)

2 Disconnect the battery negative lead.

3 Disconnect the ballast resistor wiring connector, then remove the securing screw, and withdraw the ballast resistor from the body panel.

4 Refitting is a reversal of removal.


© 2018 www.fsierra.ru. All Rights Reserved.