Ford Sierra Manual

Carburettor (Weber 2V type) - removal and refitting
Fuel and exhaust systems - carburettor / Carburettor (Weber 2V type) - removal and refitting


1 Proceed as described for the Ford VV carburettor but note the following.

2 On models with an electrically-heated automatic choke, ignore all references to the cooling system and coolant hoses.

3 Not all Weber carburettors are fitted with an anti-dieselling valve.

4 Disconnect all relevant wiring plugs and vacuum pipes, if necessary noting their locations for use when refitting.

5 Disconnect the link arm from the throttle linkage instead of disconnecting the throttle cable.

6 The carburettor is secured to the inlet manifold by four nuts and washers.


© 2018 www.fsierra.ru. All Rights Reserved.