Ford Sierra Manual

Throttle pedal - removal and refitting
Fuel and exhaust systems - carburettor / Throttle pedal - removal and refitting


Removal
1 Disconnect the battery negative lead.

2 Remove the lower facia panel from the driverТs side.

3 Prise off the securing clip and disconnect the end of the throttle cable from the top of the pedal (see illustration).

11.3 Throttle pedal assembly - cable connection arrowed
11.3 Throttle pedal assembly - cable connection arrowed

4 Remove the two securing nuts, one accessible from the driverТs footwell, the other from the engine compartment, and withdraw the pedal and bracket assembly (see illustration).

11.4 Throttle pedal securing nut (arrowed) in engine compartment
11.4 Throttle pedal securing nut (arrowed) in engine compartment

Refitting
5 Refitting is a reversal of removal, but on completion check the throttle cable adjustment.


© 2018 www.fsierra.ru. All Rights Reserved.