Ford Sierra Manual

Heater motor - removal and refitting
Cooling, heating and air conditioning systems / Heater motor - removal and refitting


Removal
1 Disconnect the battery negative lead.

2 Where necessary, unclip the brake servo vacuum hose for improved access.

3 On models from 1987, unclip the windscreen washer hoses and wiring from the motor cover, and secure them to the bodywork out of the way.

4 Unscrew the two securing bolts from the motor cover, pull off the rubber moulding, then withdraw the cover (see illustration).

20.4 Unscrew the securing bolts and withdraw the heater motor cover
20.4 Unscrew the securing bolts and withdraw the heater motor cover

5 Disconnect the wiring from the motor, and detach the earth lead from its bracket.

6 Unscrew the two motor securing nuts, and withdraw the motor assembly (see illustration).

20.6 Heater motor and wiring
20.6 Heater motor and wiring

7 Unclip the casing halves, then prise open the motor retaining strap using a screwdriver, or if necessary a drift.

8 Detach the wiring from the motor, then remove the motor and fan wheels from the casing.

Refitting
9 Refitting is a reversal of removal.


© 2018 www.fsierra.ru. All Rights Reserved.